HobbyKing
HOBBYKING ECO6-10 200W 10A 6S BAL/DIS/CYC CHARGER W/ ACC.
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~10.0A |
| Ni-MH/NiCd cells | 1~18 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~24v |
| Weight | 480g |
| Dimensions | 143x119x42mm |
| Note | Power supply not included. |
5 Reviews
HobbyKing
TURNIGY VOLTAGE BOOSTER FOR SERVO & RX (1S TO 5V 1A)
| Operating Voltage | 3.2V - 4.2V |
| Max operating Current | 1.5A |
| Weight | 2.9g |
Operating Current :1A,
Lipoly Single cell voltage booster for Receivers and servos. This ...5 Reviews
HobbyKing
EXTREME ACCURACY PROP/ROTOR BALANCER
| Length | 110mm |
| Width | 91mm |
Height :, Adjustable (Max 114mm),
Extreme accuracy Prop/Rotor balancer This unit can balance most blades ...5 Reviews
HobbyKing
2205C 1400KV BRUSHLESS MOTOR
| Weight | 28g |
| Shaft | 3mm |
| Max Amp | 9.5A |
| Max Power | 121.5W |
| Thrust | 497g |
| Max Amp | 6.5A |
| max Power | 58W |
| Thrust | 349g |
5 Reviews
HobbyKing
HOBBYKING AP-03 7000KV BRUSHLESS MICRO MOTOR (3.1G)
| Lipo Range | 1S 3.7V |
| Suggested prop | 3020 |
| Weight | 3.1g (including mount and wire) |
| Shaft | 1.5mm |
| Shaft length | 6mm |
| Dimensions | 13 x 10mm |
| Voltage | 3.7V |
| Current | 2.1A |
| Thrust | 44g |
Kv: 7000rpm/v, Max current: 3A, Burst current (10sec): 4A, Test data:, 3020 prop (Recommended),
High quality micro motors. Precision wound with silver-copper wire and ...5 Reviews
HobbyKing
TURNIGY 2204-14T 19G OUTRUNNER
| Model | A2204-14 |
| Cells | 2-3 |
| Maxx Eff | 74% |
| Max Current | 7.5A |
| Weight | 19g |
| Int. Resistance | 550mh |
| Dimensions | 27.6 x 11.5mm |
| Recomended Model | (3D 220g or less) |
| Recomended prop | 8040/2S or 7035/3S |
Kv: 1450rpm/V,
An excellent motor for planes up to 220 grams (8 ...5 Reviews
HobbyKing
TURNIGY G60 BRUSHLESS OUTRUNNER 400KV (.60 GLOW)
| RPM | 400kv |
| Max current | 40A |
| No load current | 10V/2.7A |
| Current capacity | 60A/15sec |
| Internal resistance | 0.06 ohm |
| Diameter of shaft | 6mm |
| Dimensions | 81x50mm |
Battery:, 5~7 Cell /18.5~25.9V, Weight:, 359g (not including connectors),
Designed to be a direct swap out for your .60 ...5 Reviews
HobbyKing
HOBBYKING 2403 BRUSHLESS OUTRUNNER 2100KV
| Dimension | 41mm x 41mm (including mount) |
| Weight | 18g (kv2350) (Including connectors) |
| Diameter of shaft | F3mm |
| Lamination thickness | .2mm |
| Battery | 2S/7.4V |
| RPM | 2100kv |
| Max current | 11A |
| Current capacity | 12A/10sec |
| Internal resistance | 0.228ohm |
| Dimensions | 10x30mm |
| Thrust | 315gg |
| Prop | 8040 |
| ESC | 15A |
| Max Current | 11A |
| Battery Type | 2S only |
5 Reviews
HobbyKing
IMAX B6-AC CHARGER/DISCHARGER 1-6 CELLS (GENUINE)
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~5.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 580g |
| Dimensions | 133x87x33mm |
| Note | Power supply not included. |
5 Reviews
HobbyKing
CR23M CONTRA ROTATING BL SYSTEM1550KV
| Dimension | 23mm x 54mm |
| Diameter of shaft | 3.0mm |
| Length of front shaft | F13mm |
| Max current | 12.6V/269w |
| Prop | GWS 8x4 |
| ESC Required | Two 25A |
Specification:, Weight:, 73g (including prop spinner & mount), Voltage:, 7.4, 8.0, 8.4, 10.0, 11.1, 12.6V, Current:, 10.5, 11.6, 12.3, 15.6, 18.0, 21.4A, Watts:, 77.7, 92.8, 103.32, 156.0, 199.8, 269.64W, Thrust:, 375, 415, 460, 595, 695, 800g, Efficiency (g/w):, 4.83, 4.47, 4.45, 3.81, 3.48, 2.97,
CR23M Contra Rotating BL System1550kv Test data; *Includes props, as ...2 Reviews
HobbyKing
6INCH RATCHET CLAMP TOOL
| Max opening | 3.5cm |
5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (1400KV)
| Weight | 349g |
| Voltage | 5~8S |
| Max Current | 110A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21mm |
| ESC | 150A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:1400rpm/V, Turns:8T,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
TURNIGY A-6-10 200W BALANCE CHARGER & DISCHARGER
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| 200W / Max Discharge | 25W |
| Discharge current range | .1~5.0A |
| Ni-MH/NiCd cells | 1~18 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~24v |
| Weight | 540g |
| Dimensions | 143x124x37mm |
Charge Current Range: .,
An advanced and powerful charger, the Turnigy A6-10 is able ...5 Reviews
HobbyKing
TURNIGY 1015 BRUSHLESS INRUNNER MOTOR 11500KV
| Battery | 1 Cell 1S/3.7V |
| RPM | 11500kv |
| No load current | 3.7V/0.4A |
| Current capacity | 4A/1sec |
| Internal resistance | 0.51ohm |
| Dimensions | 10x15mm |
| Diameter of shaft | 1mm |
| Length of front shaft | 5mm |
Max current:4A, Weight:, 5.1g (kv11500) (not including connectors),
Micro brushless inrunner. Spec. Suited for Mini EDF or micro ...5 Reviews
HobbyKing
SCM 3213 950KV BRUSHLESS OUTRUNNER
| Battery | 2-3 Lipoly |
| Max Eff | 81% |
| Max Current | 5 to 9A (over 74% efficiency) |
| Int. Resistance | 260mohm |
| 10v no Load current | .65A |
| Dimensions | 25.7 x 26mm |
| Shaft | 3mm |
| Weight | 45g |
| Model Size | up to 300-580g |
| Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 950rpm/v,
Spec.5 Reviews